At the bottom of this message are links to the drawings from Houman (solid model renderings of the optical payload) which we discussed during today's telecon.

---------- Forwarded message ----------
Date: Thu, 07 May 2015 13:03:33 -0400
From: Houman Hakima <hhakima@utias-sfl.net>
To: jalbert@uvic.ca, Cordell Grant <cgrant@utias-sfl.net>
Subject: [ALTAIR] - some images

Hi Justin,

Here are some images reflecting the changes that I have made since last telecon. The most significant one would be the PCB that is mounted around the output
port and has 6 LEDs on it. I made sure that the connectors, PCB and all the other components stay away from the sphere's 60-deg cone.

-- figures captions
fig 1: Overall view of the current payload design
fig 2: wires can be bundled. On the payload PCB same connector that is used for the multi-colour laser can be used for the 6 LEDS.
fig 3: how LED board sits around the output port
fig 4: the LEDs and their PCB fit inside the integration sphere's baffle.
fig 5: Turret connectors do not intersect with the cone.


Thanks,
Houman

   Attachment:
      http://projectaltair.org/HyperNews/get/AUX/2015/05/07/20.19-59426-1.jpg
      http://projectaltair.org/HyperNews/get/AUX/2015/05/07/20.19-41191-2.jpg
      http://projectaltair.org/HyperNews/get/AUX/2015/05/07/20.19-94534-3.jpg
      http://projectaltair.org/HyperNews/get/AUX/2015/05/07/20.19-95051-4.jpg
      http://projectaltair.org/HyperNews/get/AUX/2015/05/07/20.19-86046-5.jpg