testing without attachments

---------- Forwarded message ----------
Date: Thu, 7 May 2015 11:37:22 -0700 (PDT)
From: Justin Albert <jalbert@uvic.ca>
To: testing-hn-pa@projectaltair.org
Subject: [ALTAIR] - some images (fwd)



---------- Forwarded message ----------
Date: Thu, 7 May 2015 10:52:11 -0700 (PDT)
From: Justin Albert <jalbert@uvic.ca>
To: general-hn-pa@projectaltair.org
Subject: [ALTAIR] - some images (fwd)

Attached are some drawings from Houman (solid model renderings of the optical 
payload) for discussion during today's telecon (in < 10 minutes!)

---------- Forwarded message ----------
Date: Thu, 07 May 2015 13:03:33 -0400
From: Houman Hakima <hhakima@utias-sfl.net>
To: jalbert@uvic.ca, Cordell Grant <cgrant@utias-sfl.net>
Subject: [ALTAIR] - some images

Hi Justin,

Here are some images reflecting the changes that I have made since last 
telecon. The most significant one would be the PCB that is mounted around the 
output port and has 6 LEDs on it. I made sure that the connectors, PCB and all 
the other components stay away from the sphere's 60-deg cone.

-- figures captions
fig 1: Overall view of the current payload design
fig 2: wires can be bundled. On the payload PCB same connector that is used for 
the multi-colour laser can be used for the 6 LEDS.
fig 3: how LED board sits around the output port
fig 4: the LEDs and their PCB fit inside the integration sphere's baffle.
fig 5: Turret connectors do not intersect with the cone.


Thanks,
Houman